RF Wireless Touching LED Lights Controller
Touching RGB LED Controller is a RGB wireless remote LED controller with touching function. This LED controller is designed for LED strip light and other LED products.
Basic Parameter:
1. Frequerncy: 433 MHz
2. Supply Voltage: DC 12/24V
3. Max Powe: 216 w
Brightness +( 8 in all ) |
Brightness - (8 in all ) |
Off |
On |
Static red |
Static green |
Static blue |
Static white |
Static Yellow |
Static cyan |
Static purple |
3 base color jumpy |
Add brightness for red |
Add brightness for green |
Add brightness for blue |
7 colors jumpy |
Reduce brightness for red |
Reduce brightness for green |
Reduce brightness for blue |
3 base colors fade change |
DIY1 |
DIY 2 |
DIY 3 |
7 colors fade change |
DIY4 |
DIY5 |
DIY jumpy change |
Spark |
Operating Instructions(remote control is touching button)
1. Touch ON/OFF button, you can switch on/off the RGB strip
2. Slide the color ring, RGB strip will show the same color.
3. Increasing color button can adjust the current color to the most vivid, decreaing color button is contrary, until pure white.
4. You can adjust the brightness by dimming function, to brighten and dim the light.
5. Gradual change mode: Touch on buttn again under monochrome mode condition, RGB strip will be changed into gradual change mode. Increaing color button will speed up the color change, decreasing color button will slow down.
6. Hopping mode
7. Under Gradual change or hopping mode, touching on switch will change one to the other. Close the RGB strip and restart it if you want to enter monochrome mode.
Attentions:
1. Input voltage of remote control must be the same as RGB strip`s.
2. Match the color of output wiring when connecting.
3. When the color doesn`t match, for example, it displays blue when touching green, or displays green when touching blue, please check whether the wiring is correct. In this case, exchange blue and green