Brief Introduction:MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter.
Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.
Features:Separated connection between simulator probe and host, operation and test are more convenient.
262K color and 320*240 TFT, adjustable brightness level.
Film key-press, makes the operation more comfortable.
Power with chargeable lithium battery, can display the charge information of battery.
Key volume, can open or close.
Main Functions:
Oxygen saturation simulation;
Pulse rate simulation;
Patient state simulation preset;
Can test the reaction time of device;
Can simulate the SpO2 and pulse rate under different amplitude;
Can test the performance of device under different interference source;
Can select different R-curve.
Main Parameters:
SpO2
Measuring range: 35%~100%
Resolution: 1%
Error: When SpO2 is 75%~100%, the error is the larger between ± 2% and ± P(P denotes the precision of the tested oximeter); When SpO2 is 74%~50%, the error is the larger between ± 2% and ± P; No define when SpO2 is less than 50%.
Pulse rate
Measuring range: 25bpm~250bpm
Resolution: 5bpm
Error: 1%± 1bpm
Amplitude
Measuring range: 0.000%~20.000%
Resolution: 1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%.
Patient state
24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup.
Voltage
DC 3.6V~4.2V
Power Supply
Voltage 3.7 rechargeable lithium battery × 1
Battery working life
Charge and discharge no less than 500 times.
Accessaries
A MS100 user manual
A 5.0V adaptor
Company Profile
