Tugsten carbide disc cutter
Application.
Tungsten carbide disc cutter is mainly used for cutting paper, rubber, plywood, hardwood, PCB, PVC, stainless steel, high manganese steel and PCB, PVC electronic circuit boards and other materials. These products require high precision, no glitches, maximum abrasion resistance. We are using HIP sintered and fine grinding, polishing plating to reduce frictions when cutting, improved the accuracy and speed slitting greatly, tool life extended!
Process.
Firstly, we make raw material powder according to customer's requirements. Secondly, we press the powder to the shape and size clients required. Thirdly, the dies are sintered in the oven. Fourthly, some need post-handle if customer need.
Advantages.
--HIP sintering
--precision +0.03
--100% Virgin pure Raw materials
--Flexible payment terms (L/C,T/T, western union, etc)
--Certificate of origin available
--7days 24 hours after-sale service
Company info.Zhuzhou Hongtong, a professional Chinese manufacturer of tungsten carbide products. We supply tungsten carbide ball/seat, seal ring,plate,strip,nozzle,rod,brazed tips,mining tips,inserts,disc cutter,wire drawing die,cold heading die,and so on. With more than 10 years experience, we can provide you more than you can image.
Grades recommend.
Grade |
Density |
Bending Compression |
Hardness |
Mechanical and introduction |
International Standard |
g/cm 3 |
MPa |
HRA |
YG6A |
14.9 |
1850 |
92 |
Fine grain alloy, good wear resistance. Semi finishing of chilled cast iron, non-ferrous metals alloys, semi-finishing and finishing of hardened steel, alloy steel. |
K10 |
YG6 |
14.8 |
2450 |
90.5 |
High wear resistance, high bending strength, used for disc saw blades in electrical line. |
K20~K30 |
SH25 |
14.8 |
2200 |
89.5 |
High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrous metals and their alloys as well as. |
K20 |
YG8 |
14.7 |
2320 |
89.5 |
The use of high strength, impact resistance, shock resistance higher than SH25, but the wear resistance and cutting speed is low. For cast iron, non-ferrous metals and alloys, non-metal material low speed roughing. |
K20 |
YG10X |
14.5 |
2200 |
91 |
Fine grain alloy, good wear resistance. Used for processing hard wood, veneer board, PCB,PVC and metals. |
K30 |
LS2T |
14.5 |
2480 |
92 |
Fine grade alloy, with high wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory |
K30 |
Contact.Arris Zhang
Oversea sales manager
Mobil: 86 13974173665
Web: www.zzhthj.com
Add: No.86, Mingri Rd, Tianyuan Dist,Zhuzhou,Hunan,China.
Postal:412007