Home »Products »Metallurgy, Mineral & Energy »Alloy
TitleProduct

Corrosion Resistance Super Alloy Inconel C-276

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Shanghai

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-03 20:22

  • Browse the number:

    150

Send an inquiries

Company Profile

Shanghai Bozhong Metal Group Co., Ltd.

By certification [File Integrity]

Contact：Miss Janet Chang(Mr.)  

Email：

Telephone：

Area：Shanghai

Address：Shanghai

Website： http://shanghaibozhong.kskuntai.com/

Product Details


Corrosion Resistance Super alloy INCONEL C-276Introduction

Inconel is a group of austenitic nickel-chromium-based super alloys produced by Special Metals Corporation. Super alloys are referred to as high performance alloys that function well in environments with elevated temperatures.

Super alloy INCONEL C-276 has high molybdenum content which provides the material with localized corrosion resistance like pitting. This alloy is generally known for corrosion resistance in a wide range of aggressive media. The low carbon content in this alloy helps to reduce carbide precipitation while performing welding.

The following section explains in detail about super alloy INCONEL C-276.

Chemical Composition

The chemical composition of INCONEL C-276 is outlined in the following table.

Element Content (%)
Molybdenum, Mo 15-17
Chromium, Cr 14.5-16.5
Cobalt, Co 2.5 max
Manganese, Mn 1
Vanadium, V 0.35 max
Silicon, Si 0.08 max
Phosphorus, P 0.04 max
Sulfur, S 0.03 max
Carbon, C 0.01 max
Nickel. Ni 62.5-67.5
Physical Properties

The physical properties of INCONEL C-276 are tabulated below.

Properties Metric Imperial
Density 8.89 g/cm3 0.321 lb/in3
Melting point 1325 °C 2417 °F
Mechanical Properties

The following table shows mechanical properties of INCONEL C-276.

Properties Metric Imperial
Tensile strength 740.5 MPa 107400 psi
Yield strength 347 MPa 50300 psi
Elastic modulus 205 GPa 29700 ksi
Elongation at break 67% 67%
Thermal Properties

The thermal properties of INCONEL C-276 are tabulated below.

Properties Metric Imperial
Thermal conductivity (@23°C/73.4°F) 9.80 W/m-K 68.0 BTU in/hr.ft².°F
Fabrication and Heat treatment Welding

Weldability of INCONEL alloy C-276 is rated as good. This material can be used as-welded for most applications.

Hot Working

Hot working of this alloy can be performed 870 and 1230°C (1600 and 2250°F). in case of performing heavy working, it has to be above 1090°C (2000°F).

Annealing

INCONEL alloy C-276 can be annealed at 1150-1175°C (2100-2150°F) and rapidly cooled by water quenching.

Applications

INCONEL C-276 is chiefly used in the following areas:

  • Chemical processing
  • Pollution control
  • Pulp and paper production
  • Industrial and municipal waste treatment
  • Recovery of sour natural gas.

Products made using INCONEL C-276 are as follows:

  • Air pollution control components such as ducts, stack-gas re-heaters, dampers, stack liners, scrubbers, fans and fan housings
  • Components required in chemical processing such as reaction vessels, heat exchangers, evaporators, and transfer piping.

Stock

Form

Specification

Supply Form

Others

Sheet

Thickness:0.40-4.75mm,General Width:1000,1219,1500mm

Whole Coil or piece of it

Cold Annealed,Surface 2B,2E

Plate

Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)

Whole Coil or piece of it

Single hot rolling,Solid solution annealed state,Surface 1D

Belt

Thickness:0.10-3.0mm,Width:50-500mm

Whole Coil or Specified size

Cold Annealed,Surface 2B,2E

Bar & Rod

Rolled barΦ5-45mm,Length≤1500mm

Polished Bar(circle,Square)

Solution annealing,descaling

Forged barΦ26-245mm,Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy


4. Contact us

Name: Denny Cheng

Direct line: 021-67897611