Product Details
China Supply Zipper Injection Molding Machine
1. Machine Introduction:
Production process in the process of adjustment is the necessary way to improve product quality and production. As the injection molding cycle is very short, if the process conditions to master is bad, waste will be endless. In the adjustment process, change one the best conditions for observation a few times more, if the pressure, temperature, time, all together, very easy to cause confusion and misunderstanding, is out of the question and I don't know dangyang. Adjust the process there are a variety of measures and means. For example: solve the problem of products note discontent is more than a dozen possible solutions, to choose the solution problem of one, two main problems, to solve the problem. In addition, still should pay attention to the relationship between syndrome differentiation in the solution. For example, products in the sag, sometimes to improve material temperature, sometimes to lower temperature; Sometimes to increase capacity, or to reduce the shoes. To bearing
2.Technical parameters
Model |
HT-DCJ512 |
degree of automation |
Full automatic |
Function |
Zipper equipment |
Power |
220v |
frequency |
500R60HZ |
Motor |
3 phase |
The machine room |
2M2 |
2. Contact Information: