Product Details
Hydraulic Automatic Two-Roll Plate Bending MachineThis series can produce relatively large size cylindrical product, which length is up to 1500MM
The mould shaft(mandrel) is under the rubber shaft, when we start the machine, the rubber shaft will move down to the mandrel by two hydrocylinders. At the same time, due to the elastic distortion of rubber shaft, the steel plate will happen plastic distortion too.
1. Feeding Shelf -- Two types:
hand movement or
automatic2. Mandrel (Mould Shaft) -- It is
customizable by your drum diameter and material
3. Rubber Shaft --
Germany Bayer Polyurethane Rubber4. Hydrocylinder -- Wuxi Deli brand(customizable)
5. Machine Body -- Superior Steels
6. Unloading Shelf -- Air-operated
Rounding Result:Advantage:*easily taking out the cylindrical product
*easy operation(manumotive/automatic/emergency-stop and etc)
*once shaping
*good roundness and etc.
The mandrel can be designed according to your requirements.
Main Technical Data:
Model |
R2L-1500-I |
Machining Material |
Carbon/Stainless Steel |
Diameter Tolerance |
±0.5mm |
Machining Diameter |
¢100mm~¢750mm |
Seam Width |
5mm~10mm |
Machining Effective Length |
200mm~1500mm |
Axial Malposition Tolerance |
±0.5mm |
Plate Thickness Range |
0.8mm~4mm |
Roll Speed (rpm) |
2(adjustable) |
Workshop: If you are interested in this machine, please contact us for more information, welcome to contact us at any time, we will reply you as soon as possible!