Product Details
Paper machinery,Paper machine,paper machine parts&Accessories
Combination balde coater
The device introduces the blade coating technology.
Frame 1sets
Frame Welded in ordinary steel and box-shaped structure
Base plate :casting
Coating backing roller 1 sets
Diameter / roll body length :φ600/2400mm
Roller material : 20 # steel rolling
Roller body thickness :18mm
Coating Material:High-quality neoprene synthetic rubber
Rubber Hardness :Shore 75 º ± 2
Cladding thickness: 20mm
Bearing Type:SKF or FAG
Bearing Lubrication :Grease
Coating feeding roller 1 sets
Diameter / roll body length :φ295/2400mm
Roll Material:20 # seamless steel
Roller Surface Treatment:0.08mm chrome
Bearing Lubrication :Grease
With drive shaft head
Spreader roller 1 sets
Diameter / roll body length :φ156/2400mm
Roller sleeve material :20 # seamless steel pipe
Surface treatment:Chrome roller
Bearing Lubrication :Grease
Roller sleeve coupling :Rubber coupling
Arc adjustment :Worm
Empty wheel sets Rope:Cast aluminum
Coating trough device 1sets
Built coating feeding chamber, feed room, overflow chamber.
Trays is made with 304 stainless steel plate.
Supply to explorer flanged.
Coating metering unit 1sets
The range of Blade angle adjustment :15 ° -55 °.
Blade angle :Mechanical display.
Arm moving: Pneumatic tires.
Scraper beam is steel plate welded structure. Rotating bearing is plain bearings.
The horizontal angle of scraper point and back roller blade is 20 °
Scraper blade width is 100mm, thickness is 0.38mm.
Banner coating weight single-point adjustment device is accurate screw thread device. The adjustment spacing of banner coating weight is 70mm.
Limit device 2 sets
It is used for adjusting the gap of the backing roll and the feed roller, scraper head and backing roll.
Roll edge lubrication device 1sets
For cleaning,lubricating and cooling the edge of the backing roll.
Clear edge devices 1sets
Mounted on both side of the upper roller, the blade is made of rubber. It can adjust coating width.
Compressed air systems 1sets
Equipped with air source treatment components ,actuators and control components for coating station to act .
Control unit: pressurized scraper beam to moves
Feeding roller moving
Coating trough moving
Scraper blade clamping
Electrical control system 1sets
Equipped with control unit electrical control system.
Control unit: compressed air systems.
Company Profile
