Rubber Open Mixing Mill, Rubber Mixing Mill, Open Mixing Mill,Two Roll Mixing Mill, Bull Gear Drive Mixing Mill XK-560USE:
Rubber Mixing Mill is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
Features:Roller Material: Chilled Alloy Cast Iron
Roller Hardness: 68 - 75 HRC
Cooling System: Water Cooling
Control Mode: Manual or automatic optional
Compact Structure, Low noise.
Different types of reducer available.
Details Description:
A. The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
B. The machine is equipped with an overload protection device to prevent the main components from being damaged.
C. The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
D. The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
E. The base frame is a whole framework, which is convenient for installation.
F. Stock bender for direct rubber sheet and knife to cut as your need to assemble.
G. Auto-lubrication system for greese or oil and match bearing bush.
MODALITY:
A. Two roll mixing mill: Connon Gear Type (Nylon shoe, Copper shoe and Bearing).
B. Two roll mixing mill: Reducer use Hard Tooth Face Type.
C. Two roll mixing mill: B type. (The motor under the roller)
D. Two roll mixing mill: H type.
Item |
XK-160 |
XK-230 |
XK-250 |
XK-300 |
XK-360 |
XK-400 |
XK-450 |
XK-560 |
XK-550B |
XK-660 |
Working Diameter of rolls (mm) |
160 |
230 |
250 |
300 |
360 |
400 |
450 |
560/510 |
550 |
660 |
Working Length of Rolls (mm) |
320 |
600 |
620 |
750 |
900 |
1000 |
1200 |
1530 |
1500 |
2130 |
Front Roll Surface Speed (m/min) |
8.95 |
10.21 |
14.1 |
15.1 |
16.25 |
18.65 |
24.26 |
27.72 |
27.94 |
28.6 |
Friction Ratio |
1:1.35 |
1:1.19 |
1:1.17 |
1:1.25 |
1:1.25 |
1:1.27 1:1.27 |
1:1.2 |
1:1.22 |
1:1.24 |
1:1.09 |
Max. nip (mm) |
4.5 |
7 |
8 |
10 |
10 |
10 |
15 |
15 |
15 |
15 |
Capacity per Batch(kg) |
1-2 |
6-10 |
8~15 |
15~20 |
20~25 |
18-35 |
25-50 |
35~50 |
50~60 |
165 |
Motor Power (kw) |
5.5 |
15 |
18.5 |
22 |
30 |
37 |
55 |
90 |
110 |
245 |
Dimensions (mm) |
L |
1380 |
2800 |
3400 |
3400 |
3780 |
4350 |
5200 |
5845 |
5870 |
7465 |
W |
860 |
1200 |
1500 |
1500 |
1850 |
1850 |
2380 |
2284 |
2475 |
3662 |
H |
1320 |
1120 |
1500 |
1550 |
1750 |
1785 |
1840 |
1978 |
2045 |
2080 |