Send inquiry
Bubble Machine is suitable for all kinds of large-scale performance, TV performance and entertainment places. Non-toxic bubble fluid makes it safe, remote control makes it easy handle and four moving makes it convenient to move on the stage. Full of colorful bubbles makes you just like were in a fairy tale.
Power:60W
Voltage used:AC110-120V/220-240V,50/60Hz
Tank capacity:0.6L
Remote controller:√
Installation:
1. Take away all pack material especially the spray mouth.
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality fog liquid will damage fog machine.
4. Plug the plug of remote console in the socket of the back of machine.
Operation:
1. Connect the power line to the power socket with earth line. Turn the switch at "On" and the machine heat. Smoke and bubble machine begins heating, until the completion of heating, the green light on the remote control. Simple to use, with water to wash the plastic tray and turntable, then poured into special bubble solution, connected to the controller, through the power, (you can switch between automatic control and remote control selection).
2. Press red key, the machine will spray fog (Press it as long as you need).
3. Can set the machine at a high place (with hanger) or on the ground. Do not spray fog to people directly and the lean angle should less than 15°
4. Often check whether there has enough fog liquid in machine. The operation will make big damage to the machine if there has no fog liquid.
5. If the fog is small, blue has noise or there has no fog, please power off and check fog liquid, fuse, the connector of remote console and power plug. If the problem could not be solved after check these parts, please stop check and send it back to distributor for repair.
Power:60W
Voltage used:AC110-120V/220-240V,50/60Hz
Tank capacity:0.6L
Remote controller:√
| Place of Origin: | Guangdong, China (Mainland) | Brand Name: | JBL | Model Number: | JL-B-100 |
| Type: | stage small bubble machine | Power: | 60w | Warranty: | 1year |
| Tank capacity: | 0.6L | Control mode: | wireless remote control | Output distance: | 2m |
| Packaging Details: | carton or flight case according to your requirement |
| Delivery Detail: | 3-5days for small order, within 15 days for big order |
Installation:
1. Take away all pack material especially the spray mouth.
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality fog liquid will damage fog machine.
4. Plug the plug of remote console in the socket of the back of machine.
Operation:
1. Connect the power line to the power socket with earth line. Turn the switch at "On" and the machine heat. Smoke and bubble machine begins heating, until the completion of heating, the green light on the remote control. Simple to use, with water to wash the plastic tray and turntable, then poured into special bubble solution, connected to the controller, through the power, (you can switch between automatic control and remote control selection).
2. Press red key, the machine will spray fog (Press it as long as you need).
3. Can set the machine at a high place (with hanger) or on the ground. Do not spray fog to people directly and the lean angle should less than 15°
4. Often check whether there has enough fog liquid in machine. The operation will make big damage to the machine if there has no fog liquid.
5. If the fog is small, blue has noise or there has no fog, please power off and check fog liquid, fuse, the connector of remote console and power plug. If the problem could not be solved after check these parts, please stop check and send it back to distributor for repair.